Open Access Journal

Manuscript submission

Volume 65 (2014), issue 3
Title:

Changes Caused by Heat Treatment in Color and Dimensional Stability of Beech (Fagus sylvatica L.) Wood

Abstract:

Thermal modification of wood permanently alters several of its chemical and physical properties. Beech wood is one of the most important hardwoods in Central and Eastern Europe and is extensively used in furniture production. In this study the effects of thermal modification of beech wood (Fagus sylvatica L.) on hygroscopic properties were examined and the color changes of the treated wood were determined. Beech wood has been subjected to a heat treatment at the temperature of 180 °C for five different durations ranging from 2 to 10 h. A more intense, gradual color change of the treated samples was observed after 4-h treatment, whereas in some other cases the recorded alterations were less intense. The most pronounced color differentiations compared to untreated samples occurred in 8-h and 10-h treatments. Dimensional stability and absorption were measured after 1-h, 3-h, 6-h, 1 day and 3 days immersion in water. The 8-h treatment duration exhibits the greatest reduction of swelling and absorption percentage.

Publisher

Faculty of Forestry and Wood Technology
HRCAK
ORCID
DOI
CROSSREF

DRVNA INDUSTRIJA Scientific Journal of Wood Technology

ISSN 0012-6772 (Print) / ISSN 1847-1153 (Online)

Faculty of Forestry and Wood Technology University of Zagreb, Svetošimunska 25, 10000 Zagreb, Hrvatska - Croatia
Tel: +3851 2352 430, E-mail: drind@sumfak.hr
Editor-in-Chief: Prof. Ružica Beljo-Lučić, Ph.D. E-mail: editordi@sumfak.hr
Cookie settings