Open Access Journal

Manuscript submission

Volume 64 (2013), issue 1
Title:

Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Abstract:

This paper presents the analysis of the influence of conventional hot (CH) and high frequency (HF) gluing on relevant physical and mechanical properties of Laminated Veneer Lumber (LVL) made from beech peeled veneer with the thickness of 2.1 mm. Student’s T-test was applied to determine the signifi cance of differences between mean values of results obtained for the two different treatments. A significant difference has been determined for the thickness loss, density, moisture and bending strength, while no statistically significant difference has been established for the modulus of elasticity and shear strength of gluing between the means of the tested samples.

Publisher

Faculty of Forestry and Wood Technology
HRCAK
ORCID
DOI
CROSSREF

DRVNA INDUSTRIJA Scientific Journal of Wood Technology

ISSN 0012-6772 (Print) / ISSN 1847-1153 (Online)

Faculty of Forestry and Wood Technology University of Zagreb, Svetošimunska 25, 10000 Zagreb, Hrvatska - Croatia
Tel: +3851 2352 430, E-mail: drind@sumfak.hr
Editor-in-Chief: Prof. Ružica Beljo-Lučić, Ph.D. E-mail: editordi@sumfak.hr
Cookie settings