Open Access Journal

Manuscript submission

Volume 62 (2011), issue 3
Title:

Formaldehyde Emission from Wood-Based Panels Bonded with Different Formaldehyde-Based Resins

Research subject and fields:
Abstract:

In this study, the formaldehyde emission (FE) from different types of particleboard, medium density fiberboard (MDF), and plywood products supplied from a commercial plant in the Czech Republic were evaluated by gas analysis (EN 717-2) and European small chamber (EN 717-1) methods. The significant effects of manufacturing variables (board type and thickness) as well as different types of formaldehyde-based resins on FE measured by gas analysis were obtained. When the E1 type adhesives were employed, a wide variation in the quantity of free formaldehyde was observed among the three product types. The FE values of plywood samples measured by gas analysis were lower than those of the particleboard and MDF samples. The correlation between the two methods for the particleboard and MDF were good (R2 = 0.82 and 0.76, respectively) and however for plywood (R2 = 0.52) it was not convincing. FE specifi ed in EN 717-2 was comparable with the EN 717-1 values for the same board type and thickness as well as the resin type and below the E1-emission class.

Publisher

Faculty of Forestry and Wood Technology
HRCAK
ORCID
DOI
CROSSREF

DRVNA INDUSTRIJA Scientific Journal of Wood Technology

ISSN 0012-6772 (Print) / ISSN 1847-1153 (Online)

Faculty of Forestry and Wood Technology University of Zagreb, Svetošimunska 25, 10000 Zagreb, Hrvatska - Croatia
Tel: +3851 2352 430, E-mail: drind@sumfak.hr
Editor-in-Chief: Prof. Ružica Beljo-Lučić, Ph.D. E-mail: editordi@sumfak.hr
Cookie settings